Boxing mouthguard
Boil and bite boxing mouthguards: single, double, country colours and printed designs
The essentials: the mouthguard is the only piece of boxing equipment whose absence gets paid for at the dentist. It protects the teeth, stops the jaws slamming together and keeps the lips from being cut against the incisors. Every model is boil-and-bite EVA: you mould it at home in a few minutes on your own teeth. Choose from a plain model in 5 colours, a vampire fang design in 10 combinations, a double arch, the black and gold Esprit Boxe range and 9 countries. Case included, free standard shipping.
Punching or taking punches without a mouthguard exposes the enamel and the jaw joint directly. Its job goes beyond the teeth: by sitting between the two arches, it absorbs part of the energy that would otherwise travel up into the joint. That is why it is required for sparring in almost every club, and mandatory in competition.
🥊 Our mouthguards
The plain model, in 5 colours. The plain mouthguard is our entry point: boil-and-bite EVA in blue, red, green, yellow or clear, supplied in a case with a ring to clip to your bag. It covers the upper jaw, leaves the lower one free and barely restricts breathing: the most common format in English boxing.
The fang design. The vampire mouthguard draws fangs along the jaw line, formed where two colours meet in the material rather than by printing: the design never wears off. Ten colour combinations, and a pack of 10 to kit out a club or a team in one go.
The double arch. The double mouthguard wraps both arches: it also protects the lower teeth and stops the jaws slamming together on an upward shot. Favour it in MMA, Muay Thai and hard sparring, in exchange for more restricted breathing.
The Esprit Boxe range. The Esprit Boxe mouthguard, black with a gold logo, comes in a case whose lid carries the moulding instructions printed on it — so you always have them to hand, even months later.
Country colours. Nine models to carry your colours into the ring: France, Morocco, Algeria, Congo, Belgium, Switzerland, Italy, Spain and Ivory Coast. Morocco, Algeria, Switzerland, Belgium and Congo carry the flag design itself, not simple colour bands.
A gift that cannot miss: there is no size to know, since a mouthguard moulds to the wearer's own teeth. And as it is a consumable, a second one is never wasted.
📊 Which mouthguard should you choose?
| Model | Type | What sets it apart | Who it is for |
|---|---|---|---|
| Plain | Single | 5 colours, case with ring | Starting out |
| Vampire | Single | Fang design, 10 colourways | Style above all |
| Double | Double | Both jaws | MMA, Muay Thai, sparring |
| Esprit Boxe | Single | Black and gold, instructions on the case | The house range |
| Country | Single | 9 flags to choose from | Competition, gifts |
| Pack of 10 vampire | Single | 10 pieces | Clubs, gyms, teams |
🔥 Getting the mould right
Every mouthguard we sell is boil and bite: the material softens in hot water, takes the shape of your teeth, then hardens holding the impression. That is the difference between a mouthguard that floats and one that stays put without you clenching your jaw.
- Prepare a container of boiling water and a bowl of cold water.
- Immerse the mouthguard fully in the boiling water for the time given on the case or the instructions, until it softens.
- Take it out and dip it briefly in the cold water, so it does not burn your mouth.
- Place it on the upper teeth, mould it with your thumbs, close the jaw lightly and suck to draw the material against the teeth. On a double model, bite down firmly: both impressions are taken at once.
- Remove it and plunge it into cold water to set the impression.
It is reversible. A failed first attempt does not ruin the product: back in boiling water, the EVA returns to its original shape and you can start again. Just avoid repeating the cycle too often, as the material tires over time.
🧱 EVA and puncture resistance
EVA is the reference material for mouthguards: soft enough to follow the teeth, dense enough to absorb and spread the energy of an impact instead of passing it straight to the jaw.
Puncture resistance is the criterion nobody looks at and the one that matters most: it is what stops an incisor going through the material on a frontal shot. A punctured mouthguard protects nothing, even if it looks intact.
🧼 Care and lifespan
- Rinse in cold water after every session, then air dry before putting it away.
- Never use hot water to clean it: it would soften the material and erase your impression.
- Always in its case, never loose at the bottom of the bag: it gets crushed, picks up odours and carries bacteria back into the mouth.
- Keep it out of a car in the sun and away from radiators: heat distorts the impression.
- Replace it as soon as it punctures, cracks, distorts, or no longer stays in place on its own.
❓ Frequently asked questions
What does a mouthguard actually do?
Three things. It protects the teeth from a direct impact. It stops the jaws slamming together, which absorbs part of the energy that would otherwise travel into the joint. And it puts a barrier between the lips and the incisors, which cut at the slightest shot. It is required for sparring in almost every club.
What is a boil and bite mouthguard?
One you mould yourself on your own teeth: immersed in hot water it softens, takes the shape of your teeth, then hardens holding the impression. It then stays in place on its own, without you clenching your jaw. An unmoulded model floats in the mouth, restricts breathing and ends up being spat out.
How do I mould a mouthguard?
Immerse it fully in boiling water for the time given on the case, dip it briefly in cold water so it does not burn you, place it on the upper teeth, mould with your thumbs, close the jaw lightly and suck to draw the material against the teeth. Finish with cold water to set the impression.
Can I redo the mould if I get it wrong?
Yes, the process is reversible: back in boiling water, the EVA returns to its original shape and you can start again. Avoid repeating the cycle too often, as the material tires over time.
Single or double mouthguard?
The single covers the upper jaw, leaves the lower one free and barely restricts breathing: the most common format in English boxing. The double wraps both arches, also protects the lower teeth and stops the jaws slamming together on an upward shot, which suits MMA and Muay Thai — in exchange for more bulk and more restricted breathing.
Which colour should I pick for competition?
Be careful with red: some sanctioning bodies, notably in amateur boxing, prohibit it to avoid any confusion with blood. Check your governing body's rules before an official bout and, if in doubt, go for black, clear or blue. In training and sparring there is no restriction.
How do I clean and store a mouthguard?
Rinse in cold water after every session and air dry before putting it back in its case. Never use hot water to clean it: it would soften the material and erase your impression. Keep it out of a car in the sun and away from radiators.
When should a mouthguard be replaced?
As soon as it punctures, cracks, distorts or no longer stays in place without you clenching your teeth. A punctured mouthguard no longer protects, even if it looks intact at first glance. It is a consumable, and dental equipment is not where you save money.
Is a case included?
Yes, every mouthguard comes with a ventilated storage case. On several models, including the Esprit Boxe range, the lid even carries the moulding instructions printed on it. Always keep the mouthguard in its case rather than loose at the bottom of the bag.
Can a whole club be equipped in one order?
Yes, the vampire mouthguard comes in a pack of 10, designed for clubs, gyms and teams. It is the way to kit out a group of beginners at once or to keep spares: someone who turns up to sparring without a mouthguard cannot train. For larger volumes, write to info@esprit-boxe.com.
🛒 The Esprit Boxe world
- boxing headgear — the essential companion to a mouthguard in sparring.
- groin guards and body protection — belly pads and chest protectors.
- boxing gloves and hand wraps — to protect the hands.
- boxing shorts — including our country models, matching the mouthguards.
- punching bags and focus mitts and Thai pads — for technical work.
- boxing rings and MMA cages — to equip your club.
Need a broader view? See our boxing equipment guide. To protect the legs: shin guards, rigid shell or slip-on sleeve, instep guard included. For the corner: cutman equipment, stainless medical iron and vaseline wristband.