Boxing wall stickers
-
- Regular price$17.00
The essentials: seven boxing and MMA designs cut from monochrome adhesive vinyl: crossed gloves, club crest, gorilla on guard, MMA lettering, boxer with arms raised. Two widths, 28 cm / 11 in in M and 43 cm / 17 in in L, the height varying with the design. Transfer film and instructions included. €14 to €19 depending on the design and size.
Seven designs, two widths, and the height follows the drawing
All seven designs share the same width — 28 cm / 11 in in M, 43 cm / 17 in in L — and it is the height that changes with the drawing: 28 cm / 11 in for the square crests, 46 cm / 18 in for the hanging gloves, up to 72 cm / 28 in in L. Lined up on one wall, they therefore keep consistent edges.
The seven designs and their dimensions
Each design keeps the same width in M and in L; it is the height that changes with the drawing.
| Design | What the drawing shows | Size M | Size L |
|---|---|---|---|
| Gloves, crown and laurel | Two crossed gloves in a laurel wreath, a crown above, a BOXING banner | 28 × 28 cm / 11 × 11 in | 43 × 43 cm / 17 × 17 in |
| Boxing Club crest | A glove in a rayed crest, CL and UB either side, a BOXING banner | 28 × 28 cm / 11 × 11 in | 43 × 44 cm / 17 × 17 in |
| Boxing Club and ring ropes | Boxing Club between two ring ropes, a pair of gloves below | 28 × 28 cm / 11 × 11 in | 43 × 43 cm / 17 × 17 in |
| Hanging gloves | A pair of gloves hanging by the laces, portrait format | 28 × 46 cm / 11 × 18 in | 43 × 72 cm / 17 × 28 in |
| MMA Mixed Martial Arts | The MMA lettering, a high kick and a guard drawn in reverse inside the letters | 28 × 42 cm / 11 × 17 in | 43 × 65 cm / 17 × 26 in |
| Gorilla on guard | A gorilla face on, fists closed in front of the chest | 28 × 28 cm / 11 × 11 in | 43 × 44 cm / 17 × 17 in |
| Boxer with arms raised | A bare-chested boxer, arms raised, above a Boxing Club mark between ropes | 28 × 33 cm / 11 × 13 in | 43 × 51 cm / 17 × 20 in |
Technical specifications
| Specification | Detail |
|---|---|
| Type | Contour-cut wall sticker, no background |
| Material | Monochrome adhesive vinyl, matt finish |
| Designs | 7 to choose from |
| Widths | 28 cm / 11 in (M) or 43 cm / 17 in (L) |
| Heights | 28 to 72 cm / 11 to 28 in depending on the design |
| Colour | Black |
| Supplied with | Clear transfer film and fitting instructions |
| Surfaces | Smooth painted wall, smooth wallpaper, varnished wood, tile, glass, metal |
| Removal | Peelable, not reusable |
| Use | Indoor |
| Price | €14 to €19 depending on the design and size |
Tip: the square designs — gloves and laurel, crest, gorilla — sit well above a door or between two windows. The portrait designs, hanging gloves and boxer with arms raised, want a clear run of at least 80 cm / 31 in in size L. For a wall over two metres / 6.5 feet, the Discipline beats Motivation sticker runs up to 178 cm / 70 in wide.
Which surfaces a sticker holds on
The principle is simple: the smoother and cleaner the surface, the better the adhesive grips. Here is what vinyl manufacturers recommend, borderline cases included.
| Surface | Verdict | What to know |
|---|---|---|
| Smooth painted wall, plasterboard | Yes | The reference surface. Dust it, degrease with water or rubbing alcohol, let it dry. |
| Smooth wallpaper | Yes | On well-stuck paper. When removing, peel slowly so the strip is not lifted. |
| Glass, mirror, tile | Yes | Excellent grip. Rinse without glass cleaner, which leaves a silicone film. |
| Varnished wood, melamine, metal, plastic | Yes | Door, cupboard, locker, ring frame: anything smooth and non-porous. |
| Bathroom, damp room | Yes | Vinyl is unaffected by damp or steam. Keep clear of the zone the shower sprays directly. |
| Textured render, stipple, exposed brick, raw concrete | No | The adhesive only meets the peaks of the relief. A canvas print is the answer on those walls. |
| Fresh paint | Wait | Manufacturers quote 10 days to 6 weeks of off-gassing; the figure given most often is 3 weeks. On recent matt paint, wait longer. |
| Dusty, greasy or chalking wall | No | Clean it first. A wall that leaves a white mark on your finger will not hold the adhesive. |
Fitting, in five steps
The sticker arrives in three layers: silicone backing paper underneath, the cut vinyl, and the clear transfer film on top. That film is what lets you apply the whole design in one piece, without aligning each element.
| Step | What to do |
|---|---|
| 1. Prepare | Clean the surface with water or rubbing alcohol, never with glass cleaner. Let it dry completely. |
| 2. Squeegee flat | Lay the sticker on a table and run a rigid card over the transfer film, from the centre outwards, so the vinyl bonds to the film. |
| 3. Position | Peel off the backing paper. Hold the assembly by the top against the wall, check it is level, then apply. |
| 4. Drive the air out | Run the card again in circular movements, top to bottom, firmly, over the whole surface. |
| 5. Peel the film | Peel the transfer film slowly at 180°, folding it back against the wall. If a piece of vinyl follows, press it back and run the card again. |
You may also like
- MMA wall sticker — the MMA lettering on its own, up to 89 cm / 35 in wide and 11 colours, if you want that lettering larger.
- Mike Tyson wall sticker — two boxers mid-action, up to 86 cm / 34 in, if you want a fight scene.
- Never Give Up fist sticker — a wrapped fist and the text, up to 115 cm / 45 in, if you want a message in a large size.
All thirteen designs are gathered in the boxing wall stickers collection. For a wall that is already textured, where an adhesive will not hold, see the boxing wall art, and the rest of the decoration in neon signs, rugs and blankets.
Frequently asked questions
How do you apply a wall sticker without bubbles?
The step that makes the difference is squeegeeing: once the sticker is pressed on, run a rigid card in circular movements from top to bottom, firmly, over the whole surface. The air is driven out progressively instead of being trapped. A single bubble can be pierced with a fine needle and smoothed with the card.
Can a wall sticker go on textured render?
No. On render, stipple or exposed brick the adhesive only meets the peaks of the relief and the sticker lifts within days. Vinyl needs a smooth surface. On a textured wall, a canvas print hung on a nail is the answer.
How long should I wait after repainting a wall?
Manufacturers do not all quote the same delay: 10 days to 6 weeks, the figure given most often being 3 weeks. Paint that is dry to the touch is still off-gassing, and those vapours stop the adhesive taking. Simple test: stick a piece of masking tape overnight; if it still holds in the morning, the wall is ready.
Can it be removed without marking the wall?
Yes. Warm the vinyl with a hairdryer on its low setting, then peel slowly, folding the sticker back against the wall rather than pulling it towards you. One thing to know: a sticker left for years in direct sunlight shields the paint from ageing, so its outline stays lighter when removed.
Which size should I choose for each design?
The width is the same for all: 28 cm / 11 in in M, 43 cm / 17 in in L. The height varies: 28 cm / 11 in for the square designs, 33 cm / 13 in for the boxer with arms raised, 42 cm / 17 in for the MMA lettering, 46 cm / 18 in for the hanging gloves in M. In L the hanging gloves reach 72 cm / 28 in.
Can I order several different designs?
Yes, each design is a separate item: add them to the basket one after another, changing the selection. All seven share the same width in M and in L, so they line up on one wall with consistent edges.
Our new collection is available now.
