Signet ring316L steel8 sizes
In short: a signet ring with two clenched fists face to face, knuckle to knuckle, in a metal and a width built for daily wear. 316L stainless steel, motif 11.5 mm / 0.45 in high, band 6.7 mm / 0.26 in wide and 2 mm / 0.08 in thick, 11 g / 0.39 oz. Three finishes: antique silver, gold, black. Eight sizes, US 7 to 14. €19, free standard shipping.
The recesses of the motif are blackened and the domed surfaces polished. That contrast is what lets you pick out each knuckle at arm's length: on evenly bright steel, carving this fine would close in on itself.
Two bare fists, not gloves
The two fists meet knuckle to knuckle, phalanges detailed and tendons marked. Each is closed off by a pierced cuff joining it to the band, like a wrap buckled at the wrist. The motif reads in a second.
The measurements of a real signet
The band is 6.7 mm / 0.26 in wide and 2 mm / 0.08 in thick, the motif rises to 11.5 mm / 0.45 in, and the whole ring weighs 11 g / 0.39 oz. The dimensioned drawing is in the photo gallery. Those figures register on the finger without getting in the way of closing your hand.
Finding your size
The US / French correspondence is the standard one: the French number is the finger circumference in millimetres, the US value a scale of its own. Wrap a piece of string around the knuckle without pulling, then measure it against a ruler.
Technical specifications
Good to know: measure your finger at the end of the day, when it is at its widest, and at normal temperature — finger circumference shifts by close to half a size between morning and evening. The black sitting in the recesses is part of the finish: wipe with a dry soft cloth, no polishing paste. 316L steel takes water and sweat.
You may also like
- Boxing glove ring — a single glove on an open curb link band, in seven sizes, if you want a band that reads lighter.
- Double fist bangle — the same two fists on the wrist, on an adjustable open bangle.
- Boxing glove curb bracelet — a 15 mm / 0.59 in curb bracelet in 316L steel, if you are building the set in the same metal.
Complete the set
Frequently asked questions
How do I find my ring size?
Wrap a piece of string around the knuckle without pulling, mark where it overlaps and measure it against a ruler: the number of millimetres is the French size directly. The US / FR table above gives the American equivalent and the inner diameter. Measure at the end of the day, at normal temperature.
Does the motif show boxing gloves?
No, two bare clenched fists face to face, phalanges and tendons modelled, each closed off by a pierced cuff. It is a wider symbol than the sport. The model in this collection with a sculpted glove is the boxing glove ring.
What are the exact dimensions?
Motif 11.5 mm / 0.45 in high, band 6.7 mm / 0.26 in wide and 2 mm / 0.08 in thick, 11 g / 0.39 oz. The supplier's dimensioned drawing is in the photo gallery.
Can I wear it every day?
Yes. 316L steel does not rust, takes sweat and salt water and will not darken the way solid silver does. Take it off to train and for heavy manual work, as with any ring: a rigid band on the finger does not like direct impact.
Which finish should I choose?
All three carry the same 11.5 mm / 0.45 in motif and the same blackened-recess contrast. Antique silver stays closest to the steel, gold warms the piece, black brings the relief out on shadow alone. The group shot in the gallery shows all three side by side.
Two fists on the hand
316L steel signet, 11.5 mm / 0.45 in motif, 6.7 mm / 0.26 in band at 2 mm / 0.08 in, 11 g / 0.39 oz, eight sizes from US 7 to US 14, three finishes. Free standard shipping.
